Izdelki za oprema za laserje (7)

- Entire system solution from a single source - from construction of the laser cell to integration of your chosen KEYENCE laser - self-contained and high-performance solutions for laser labeling small batches of individual parts Versions: - Compact - Rotary - Plus - Classic - Mini - Set up: directly on a desk or mounted onto the movable base frame - Latest three-axis laser marking systems offers a laser labeling system that can be precisely adjusted to the materials and part geometries that shall be labeled Advantages of integrated optical three-axis technology: - focal point to be freely set and is especially impressive - marking laser follows various shapes - easily switch between different heights (± 21 mm = 42 mm) - mark on any shape with outstanding sharpness, including on slanted surfaces, cylinders and cones Size of the labeling field (depending on the type of laser): between 120 x 120 mm and 330 x 330 mm.

Der SPECTRA DG613-LC2 ist das Spitzenprodukt vom Marktführer und ein robuster sowie wasserdichter Kanalbaulaser bis 3m Tiefe. Seine Vorteile sind, dass dieser eine Steigung von 40% aus dem Stand heraus erreichen kann. Alle anderen Marken, können nur 8% im Gehäuse erreichen. Durch eine elektronische Diebstahlsicherung, Kundenname im Display, LED Lotanzeige und ein auswechselbarer Akku haben Sie alle Vorteile in einem Modell. Des weiterem besitzt der Laser ein massives sehr robustes und kurzes Gehäuse von nur 25cm und passt daher auch in Rundungen und ab Rohrgrößen von 150mm sowie große Gummischuhe für rutschfesten Stand. Wir empfehlen immer einen zweiten Austausch-Akku für 92,- € mit zukaufen. Im Notfall können Sie aber auch 4 handelsübliche Mono Batteriezellen einlegen und 50 Std. arbeiten. Inkl. Klasse-2 Laser, Standplatte, Zieltafel, Fernbedienung, Akku, Ladegerät, Bedienungsanleitung und Koffer. Diese Spectra-Laser erhalten 5 Jahre Garantie auf das Gerät!

Entire system solution from a single source: — from construction of the laser cell to integration of your chosen KEYENCE laser — self-contained and high-performance solutions for laser labeling small batches of individual parts Equipment variants SIM-Marker Classic: Basic — mechanical Z-axis, manual adjustment of the focal point with adjusting wheel — manual opening and closing of the lift door by hand, after safety release Advanced — electric Z-axis, adjustment of the focal point with operating button — Opening and closing of the lift door with operating button — Set up: directly on a desk or mounted onto the movable base frame Advantages of integrated optical three-axis technology: — focal point to be freely set and is especially impressive — mark on any shape with outstanding sharpness, including on slanted surfaces, cylinders and cones Size of the labeling field: between 120 x 120 mm and 330 x 330 mm. Doorway (W x H) (mm):625 x 375 Max. height of the part to be labeled (mm):300 (230 with drawer) Overall dimensions with base frame (W x H x D) (mm):780 x 1932 x 960 Laser marking cell in table design (mm):780 x 1,010 x 960 (W x H x D, external measurements) Clamping plate with T-slots (mm):400 x 500 Z-axis adjustment area (mm):300 Lift door opening (mm):625 x 375 Viewing window in lift door (mm):290 x 210 Suction hose:Ø = 50 mm (installed in the laser marking cell) Electrical connection:230 V~ Max. dimensions of the part to be marked (mm):300

Entire system solution from a single source: — from construction of the laser cell to integration of your chosen KEYENCE laser — self-contained and high-performance solutions for laser labeling small batches of individual parts SIM Marker Rotary equipment options: — electrical adjustment of the focal point — Side door, double-bit lock — Connection to PC via LAN or USB Customized — integrated suction (automatic activation when writing) — PC or Notebook with side table — Set up: directly on a desk or mounted onto the movable base frame — Latest three-axis laser marking systems offers a laser labeling system that can be precisely adjusted to the materials and part geometries that shall be labeled Advantages of integrated optical three-axis technology: — focal point to be freely set and is especially impressive Size of the labeling field: between 120 x 120 mm and 330 x 330 mm. Doorway (W x H) (mm):220 x 185 Max. height of the part to be labeled (mm):180 (with holder) Overall dimensions with base frame (W x H x D) (mm):820 x 2020 x 1140 Laser marking cell with base frame (mm):819 x 2020 x 1140 ( W x H x D ) Diameter of turntable (mm):550 Z-axis adjustment area (mm):300 Max. dimensions of the part to be marked (mm):180 with WA Passage opening pivot door front (mm):220 x 185 ( W x H ) Viewing window in side wall left (mm):210 x 290 ( W x H ) Suction hose connection:Ø 50 mm Electrical connection:230V ~ Indoor lighting:Lamp

Entire system solution from a single source: — from construction of the laser cell to integration of your chosen KEYENCE laser — self-contained and high-performance solutions for laser labeling small batches of individual parts Additional possibilities with the SIM-Marker Plus: — Focal point height adjustable within a range of 42 mm (±21 mm) — Autofocus with 3-axis laser control (simultaneous control of the X, Y and Z axes of the laser optics) — Distortion-free marking of 3D objects such as bevels, cylinders, spheres and cones — Set up: directly on a desk or mounted onto the movable base frame — Latest three-axis laser marking systems offers a laser labeling system that can be precisely adjusted to the materials and part geometries that shall be labeled Advantages of integrated optical three-axis technology: — focal point to be freely set and is especially impressive Size of the labeling field: between 120 x 120 mm and 330 x 330 mm. Doorway (W x H) (mm):1000 x 505 Max. height of the part to be labeled (mm):500 Overall dimensions with base frame (W x H x D) (mm):1160 x 2080 x 1200 Laser marking cell in table design (mm):1160 x 1121 x 1201 (W x H x D), outside Laser marking cell incl. base cabinet, moveable (mm):1160 x 2080 x 1201 mm (W x H x D), outside Clamping plate with T-slots (mm):800 x 800 Z-axis adjustment area (mm):500 (electric) X-axis adjustment area (mm):600 (manual) Lift door opening (mm):1000 x 505 (W x H) Viewing window in lift door (mm):290 x 210 Suction hose:Ø = 50 mm (installed in the laser marking cell) Electrical connection:230 V~ Max. dimensions of the part to be marked (mm):500

Entire system solution from a single source: — from construction of the laser cell to integration of your chosen KEYENCE laser — self-contained and high-performance solutions for laser labeling small batches of individual parts Characteristics SIM-Marker Compact: — mechanical Z-axis, manual adjustment of the focal point with adjusting wheel — Opening and closing of lift door with operating button (electrical) — Lift door opening time < 2.0 sec. — PC-Link — Set up: directly on a desk or mounted onto the movable base frame — Latest three-axis laser marking systems offers a laser labeling system that can be precisely adjusted to the materials and part geometries that shall be labeled Advantages of integrated optical three-axis technology: — focal point to be freely set and is especially impressive — mark on any shape with outstanding sharpness, including on slanted surfaces, cylinders and cones Size of the labeling field: between 120 x 120 mm and 330 x 330 mm. Doorway (W x H) (mm):400 x 270 x 320 (D) Max. height of the part to be labeled (mm):200 Overall dimensions with base frame (W x H x D) (mm):630 x 1920 x 920 Laser marking cell in table design (mm):630 x 1000 x 920 (W x H x D), outside Clamping plate with T-slots (mm):400 x 400 Z-axis adjustment area (mm):200 Lift door opening (mm):270 x 320 (H x D) Open on 3 sides Viewing window in lift door (mm):290 x 210 Suction hose:Ø = 50 mm (installed in the laser marking cell) Electrical connection:230 V~ Max. dimensions of the part to be marked (mm):200

- Quality control and safeguarding - Individual test values and criteria - Customer-specific measuring and testing plants - Single measuring systems with manual assembly - Fully integrated and automated testing plants using robots - Optical, acoustic or electrical systems with/ without parts contact, data preparation, analysis Measuring and testing systems we were involved in: - Camera systems with corresponding image processing - Part recognition, positioning, color and surface examination, checking for damages - Optical / tactile / ultrasonic tests using sensors and displacement measurement systems - Leakage and pressure tests - Inspection and monitoring of filling level - Run-out properties and accuracy - Backlash measurement - Electrical tests and measurements - Electrical values, check measurements, switching and opening properties Used in all branches: e.g. pharmaceuticals industry, medical engineering, cosmetics, electronics and automotive industries.